View Full Version : Which Bandsaw Blade Do I need
Paul Wunder
05-18-2021, 4:13 PM
What bandsaw blade is recommended for a project on my Grizzly 14" (GO 555):
I will be cutting 16 2 1/2" diameter circles using 3/4" baltic birch to build a caterpillar pull toy for a toddler.
Would appreciate some recommendations please.
I am an occasional user. Thanks.
Doug Garson
05-18-2021, 9:52 PM
Do you have a drill press? If so, I'd recommend a hole saw rather than band saw.
Larry Frank
05-19-2021, 7:21 AM
Hole saw is good idea. Buy a good one.
Lee Schierer
05-19-2021, 7:26 AM
I agree with Doug use a hole saw. I'm not comfortable having my finger within an inch and a quarter of the blade. A scroll saw would also work.
Paul Wunder
05-19-2021, 9:09 AM
Thanks, Guys. This is one of those "Why didn't I think of that moments."
Hole saw it is!
Rod Sheridan
05-19-2021, 10:06 AM
Thanks, Guys. This is one of those "Why didn't I think of that moments."
Hole saw it is!
That's OK, I read it as " I'm going to cut a 16 1/2" circle" and thought "Who has a 16" hole saw?
Reading is hard :-) Regards, Rod
Paul Wunder
05-19-2021, 11:56 AM
Rod, Funny.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.