3/4" bandsaw blade thickness

[Lee Schierer]

I'm trying to locate the manufacturer of a 3/4" x .023" 3 TPI blade that I have. I have some questions for those of you that have 3/4" band saw blades.

What brand blade is it?

How thick is the steel that makes up the band?

What size band saw does it fit?

What type and number of teeth per inch.

[Mel Fulks]

A place I worked for years had a sharpening shop. They made the saws the length needed , some of the saws were 8 feet high. The most
used sizes for the big machines was 3/4 band ,3 teeth per inch. We didn’t have to re-saw much, but used 2 teeth per inch. We also used
some 1” bands.

[Curt Putnam]

Timberwolf 3 TPI for 17" Griz. If you cannot find the the thickness online, I'll measure it tomorrow.

[Rod Sheridan]

Hi Lee, I buy my blades from R&D Bandsaw, a local company.

My 3/4" blades are 0.032" thick, and 3 TPI

They fit any machine as they're made to order............Regards, Rod.

[roger wiegand]

Look at bandawbladesdirect.com. They will make you blades to length in a myriad of different kinds, thicknesses, and TPI. They sell Lenox primarily; I've been happy with them.

[Lee Schierer]

Look at bandsawbladesdirect.com. They will make you blades to length in a myriad of different kinds, thicknesses, and TPI. They sell Lenox primarily; I've been happy with them.

They don't seem to have any 3/4" blades that are .023 thick.

[lowell holmes]

Try this link.

https://discount99.us/bc%20saw%20and%20tool