View Full Version : 3M Jet Melt TC hot glue Gun
Brian Deakin
05-01-2021, 4:06 PM
I live in the United Kingdom a 3M Jet Melt TC hot glue Gun is for sale on eBay
The gun uses 5/8" glue sticks This size of glue stick is not widely available in the Uk
My question could I use 1/2" glue sticks with this gun
John King
05-01-2021, 11:39 PM
Ask the vendor. - John
Reed Gray
05-02-2021, 11:38 AM
Sounds to me that they want you to only use their glue sticks rather than what is more commonly available. Possibility that it is a better grade glue, but I have no clue. I did see a hot melt glue gun at my wood store that they said is used in flooring. Apparently it is hard enough to be sanded and finished.
robo hippy
Brian Deakin
05-02-2021, 12:27 PM
Thank you John and Robo Hippy for your posts
I did what John suggested and contacted the seller The gun will only advance the thicker 5/8" glue sticks
Richard Coers
05-02-2021, 1:53 PM
We used those guns with the Quad Track feeding option in the model shop at Caterpillar. Used glue sticks by the case there. I think you could overheat the heater and under heat the stick from lack of 360 degree contact with the undersized glue stick
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.