Matt Tawes
01-08-2006, 8:00 PM
Hey Guys,
I read some posts in the past about shop floor options and someone mentioned Dri-core which after researching looks appealing. Anyone out there have this in their shop? How do you like it?
My shop is on a concrete slab that unfortunately has no vapor barrier under it. Considering it's got heat & ac I don't have a big moisture problem except I have most the shops work areas covered in long sections of anti-fatique matting (which works great except of course moisture collects under them and eventually causes mildew). Basically after dealing with the mats for the last 6 years I'm thinking of putting in the wood floor to make the floor warmer and easier to roll equipment arround on. The Dricore allows moisture to escape and is heavy duty while only measuring about 7/8. If I went the 2x4 sleeper covered in plywood route I would have to pull my door units out and raise them up and of course I would have to empty my shop whereas the dricore I can lay it down and move stuff around as I lay it.
I read some posts in the past about shop floor options and someone mentioned Dri-core which after researching looks appealing. Anyone out there have this in their shop? How do you like it?
My shop is on a concrete slab that unfortunately has no vapor barrier under it. Considering it's got heat & ac I don't have a big moisture problem except I have most the shops work areas covered in long sections of anti-fatique matting (which works great except of course moisture collects under them and eventually causes mildew). Basically after dealing with the mats for the last 6 years I'm thinking of putting in the wood floor to make the floor warmer and easier to roll equipment arround on. The Dricore allows moisture to escape and is heavy duty while only measuring about 7/8. If I went the 2x4 sleeper covered in plywood route I would have to pull my door units out and raise them up and of course I would have to empty my shop whereas the dricore I can lay it down and move stuff around as I lay it.