Lisa Starr
03-30-2021, 11:40 AM
I just finished dry fitting the Side and Rear Panels for the Spool Cabinet I'm building. I still need to pre-finish the pieces, but am starting to consider the glue up. This is a photo of one of the dry fitted panels.
455314
I know I need to allow for the panels to move, so do I glue them on just one side or do I let them float completely free. If I do glue a side, is there a preferred side to leave loose? The wood in this is old, reclaimed pine? from our home and is likely virgin. It is very stable when milling. Does that change anything?
Thanks in advance for your thoughts.
Lisa
455314
I know I need to allow for the panels to move, so do I glue them on just one side or do I let them float completely free. If I do glue a side, is there a preferred side to leave loose? The wood in this is old, reclaimed pine? from our home and is likely virgin. It is very stable when milling. Does that change anything?
Thanks in advance for your thoughts.
Lisa