My revolving tool station

[dennis thompson]

453887453888
Here are a couple of pictures of a revolving tool station I made.The top section revolves to allow access to the tools placed on the top while the bottom section revolves to store tools and have easy access to them . The top section also has small sections to provide storage for the tools used on the top.It was even described by my grandson as " pretty cool" the ultimate compliment☺. But, there's always a but, I have it on casters so I can move it around the shop and I made the mistake of not using locking casters so when I rotate the top the whole thing moves. Now I could take the tools off the top, slide the top section off, it only sits on the bottom section, centered by a pipe, turn the whole thing over and put on locking casters, I know that's the proper way to fix it. Can anyone suggest an in place solution so I can avoid all those steps?
Thanks

[Lee Schierer]

Did you put lazy susan bearings under the sections that are supposed to turn?

[Julie Moriarty]

Locking casters can sometimes be a pain to lock when the casters aren't right on the edge. If you could find a flip down door stop long enough to make the floor, that might work.

Or maybe a telescopic stopper like this would work
https://images-na.ssl-images-amazon.com/images/I/6125u4R7e8L._AC_SL1000_.jpg

[dennis thompson]

yes and they do turn OK , but the whole thing turns too. I can put my foot against the caster and it won't turn but I'd like a better solution that that

[Dave Zellers]

A very low angle wedge (or 2)? Probably be just as easy pulling them out when you want to move the cabinet as unlocking the wheels would be. Not very elegant tho.

I love this idea. I have a space under a work table that will be perfect for something like that. I could store all my routers and sanders there and free up tons of shelf space.

[Lee Schierer]

Here is how I lock my mobile jointer in place so it doesn't move when I'm using it.
453936
I can flip the levers up or down with my foot or by hand.

[Rick Potter]

I was thinking simple wedges too. Another possibility is those foot operated workbench lifter thingies Rockler sells.

Sorry, can't remember the right terminology.

[dennis thompson]

A very low angle wedge (or 2)? Probably be just as easy pulling them out when you want to move the cabinet as unlocking the wheels would be. Not very elegant tho.

I love this idea. I have a space under a work table that will be perfect for something like that. I could store all my routers and sanders there and free up tons of shelf space.

Dave
If you've interested I got the plans from woodsmith plans.com. Lots of wasted plywood as you cut out all the circles involved, and don't let me forget, lots and lots of tiny plywood splinters😕

[Ira Matheny]

I have created a similar 'carousel' tool cart. I started with a heavy base and then added about 50# of sand. Then 3 round shelves build on a commercial 12" d lazy-susan ring. The whole thing is mounted on GOOD caster, [I believe they are rated 150" each, Rockler] I have no trouble with the base moving when I spin the upper shelves.

[dennis thompson]

Here is how I lock my mobile jointer in place so it doesn't move when I'm using it.
453936
I can flip the levers up or down with my foot or by hand.
Lee

That looks like it would work for me. Can you tell me what they’re called and where you bought them?
Thanks

[Lee Schierer]

Lee

That looks like it would work for me. Can you tell me what they’re called and where you bought them?
Thanks

They are Destaco clamps (https://www.destaco.com/products/straight-line-action-clamps). The ones I have are their Straight Line 605 type (https://www.destaco.com/products/straight-line-action-clamps-605). They are available through any number of sources. There are also other brands with similar functions.