Bruce Jones
03-01-2021, 6:14 PM
In the past I have had people ask to see my Embellishing processes here's some photos of my latest WIP "Sinuous"
So the third section front side is rough carved two more to go before flipping it over and doing the back side. I have also started on the base for this project so there will be no need for a plate stand, I dislike those anyway bought or made.
There will be some pyrography on this piece just how much I've not determined at this point. There is still a great deal of work yet to do on this piece.
It is a 12" D Teak bowl with a embellished Cherry rim here is some photos of a few of the hand tools I used. And of my own hand drawn design template on card stock I traced on to the rim. All the work is hand done I do use a Dremel w/ flex shaft and burs & drill bits.
So the third section front side is rough carved two more to go before flipping it over and doing the back side. I have also started on the base for this project so there will be no need for a plate stand, I dislike those anyway bought or made.
There will be some pyrography on this piece just how much I've not determined at this point. There is still a great deal of work yet to do on this piece.
It is a 12" D Teak bowl with a embellished Cherry rim here is some photos of a few of the hand tools I used. And of my own hand drawn design template on card stock I traced on to the rim. All the work is hand done I do use a Dremel w/ flex shaft and burs & drill bits.