Makita LS1019L: Which adapter to connect to 2 1/2 inch hose?

[Izzy Charo]

Hello,
Wondering how others who own this saw have connected it to dust collection. The port on the saw seems to be about 1 1/8 OD...and I would like to connect to a 2 1/2 inch flexible hose. Has anyone found an adapter that will do this?
Thanks!
Izzy

[Bruce King]

I have the 1013 and found a vacuum hose that fit around it and the other end went into my shop vac hose perfectly. It was a blue cheap wal—mart vac from many years ago that was going to be for vacuuming out the cars but was too loud.

[Stephen Rosenthal]

I have a 1013 as well and a Bosch 3931 shop vac (older model). I also have a Hoover upright vacuum (20+years old) and one of its accessories is a 15’ extension hose that connects perfectly to the shop vac and saw with an adapter.

[Joe Hendershott]

My Festool CT extractor hose fits perfectly, not sure the OD but should be able to find it. I will measure when I get to the shop.

[Dick Strauss]

Find a local woodturner and have them turn an adapter for you.

[Dave Sabo]

Izzy there are several off the shelf options. I’d suggest getting a dedicated hose, or at the least upgrade what you’ve got.

I know this works because I have it setup on my 1019.
https://www.lowes.com/pd/Shop-Vac-12-ft-x-1-5-in-Shop-Vacuum-Hose/1042233

think it might have been recently discontinued, so might be tough to find. Ridgid makes a similar kit at H. Depot.

this should work nicely
https://www.amazon.com/Cen-Tec-Systems-94192-Universal-Collection/dp/B07P8WBRM2/ref=sr_1_24?dchild=1&keywords=shop%2Bvac%2Bhose&qid=1614085520&sr=8-24&th=1






or these if you just want an adapter
https://www.ptreeusa.com/dust_adaptors.html

[michael langman]

I use my small shop vac with my 1013 and the tapered end of the vac extensions fits into the dust port on the 1013.

[Donald G. Burns]

Rockler sells some Flexiport adapters that fit small (~1"-1.5") ports. I've used one for a portable sander.