New miter saw blade.

[Tom Pritchard]

I recently acquired a new Freud Hyper-Finish F80 10" 80 tooth ATB miter saw blade to replace the stock blade that came stock on my Craftsman miter saw. My buddy Scott sold my Leitz blade and a mobile base for me on E-Bay, and made enough money on that to buy this blade for no money out of my pocket:D :D ! This blade gives almost as good of a cut as my Forrest WW II that I use on my TS. It's an incredibly heavy blade that has a great deal of carbide in the teeth. I made a quick cut in a piece of hard maple and took the best picture of it that I could so you could see the result. All-in-all, I'm very pleased with the cut! Here's a link to a Freud page that gives some details:

http://www.freud-tools.com/freudinserhy.html

And a couple pics for the "pic police"!!

[scott spencer]

I knew it wouldn't take you long to make a test cut or two! :D