A little chalk

[Tom Bender]

Yes blue tape is one way to go, but this works pretty well sometimes.

451480

Shows up the TS line too. I might have done that a little better, but it will be well hidden.

[Clifford McGuire]

What type of chalk is that? When I think of chalk, I think of those big, thick pieces from my school days.

[Lee Schierer]

I often use plain old black board chalk to mark pieces for orientation or arrangement in a panel. It is visible and doesn't leave any residue that messes with finishes.

Regarding chalk there is an old saying: " Measure with a micrometer, mark it with chalk and cut it with an axe."

[Jim Becker]

One of the best things I've done for layout work is to keep multiple "colors" of pencils available in my shop, largely around black, red and white which covers pretty much every species and situation. Sometimes having additional colors can be helpful in clarifying "what goes where", too...kinda like drawing out a design using layers that are different colors.

[Tom Bender]

This is ordinary blackboard chalk. It works much better in this case than a white pencil.

[Jim Becker]

I use that for general marking for cutting down boards for sure...but not for fine lines. The pencil format is more to my liking there. No matter...the bigger point is that light colored markings are easy to see on darker wood. :) :D