Cant find Kreg router fence dust port

[Mike Holman]

I bought a used Kreg router table with fence. The 2 1/2" dust port fitting on the back of the fence is held in place by two plastic tabs that snap into the extrusion in the fence. One of the tabs is broken off. I cant find a replacement. there is no T track on the back to bolt a different style on.
Any help??
Thanks

[Bruce Page]

Would this work?
https://www.rockler.com/router-table-dust-port?country=US&sid=V91040&promo=shopping&utm_source=google&utm_medium=cpc&utm_term=&utm_content=&utm_campaign=PL&gclid=Cj0KCQiAmfmABhCHARIsACwPRADt0ipqzy_K-tCFnrsvKaaSPBQjtq_py7jLd6EjhrCD0glehP37KhUaAm73EAL w_wcB

[Dwayne Watt]

Have you tried calling Kreg? Unless this is an obsolete fence, they may sell you one. Alternately, 3D print one of your own (or have someone do it for you).

[Mike Holman]

451469Here is a picture. thanks