warped frame and panel

[Gary Hoemann]

I'm trying to finish up an armoire with two frame and panel doors about 18" wide and 68" long. I have dry assembled the doors and one is slightly warped along the length. Short of remilling this, is there anything I can try in the glue-up or hanging to try to bring the two doors into alignment? If I put a little "opposite warp at the middle stile at glue-up, would this maybe hold it straight? Thanks for any help you can give me.

[Mark Singer]

If you resaw them in half or thirds....Then glue them up first as laminated stiles...to a flat surface...they will stay that way

[tod evans]

gary, here`s a photo of what mark speaks.

28928