Bobby Robbinett
01-19-2021, 7:09 AM
I have an old 16” Dewalt RAS and I would like to build a new top, fence, left and right extension tables for using it dedicated to crosscuts at 90 degrees only. I have the space for 8ft left and 8ft right. I will also be using a track and stop for accuracy and repeatability.
My question is how do I initially setup the fence on the top of the saw? I would like to get the saws platform and fence setup first and then use that to line up the fences on my extensions. What do I register the main platforms fence by? Should I just bolt down the platform then trail and error the fence to the blade until it is square? Any ideas?
My question is how do I initially setup the fence on the top of the saw? I would like to get the saws platform and fence setup first and then use that to line up the fences on my extensions. What do I register the main platforms fence by? Should I just bolt down the platform then trail and error the fence to the blade until it is square? Any ideas?