Christopher Shockley
01-14-2021, 1:42 AM
I’m renovating an 1890s house and I would like for all the interior doors to match. I’m missing 3 door slabs. They are 4 panel doors with a fluted detail in the center of each panel. My plan was order solid wood 4 panel doors of the same size and carve the flutes myself.
I’ve looked all over online and cannot find any information about doing this. I think the best way would be to take them apart and run the panels through my woodmaster with a custom knife, but that seems like a huge job for such a little detail. Anyone know of a jig or tool that could accomplish this on an assembled door?
Here is an image of the door:
https://www.dropbox.com/s/br6738cscfj7sh7/IMG_6707.JPG?dl=0
I’ve looked all over online and cannot find any information about doing this. I think the best way would be to take them apart and run the panels through my woodmaster with a custom knife, but that seems like a huge job for such a little detail. Anyone know of a jig or tool that could accomplish this on an assembled door?
Here is an image of the door:
https://www.dropbox.com/s/br6738cscfj7sh7/IMG_6707.JPG?dl=0