Looking for White Paint Recommendations for Spraying Cabinets and Wainscoting

[Josh Baldwin]

Hey everyone I'm building my first set of kitchen cabinets and I'm also doing a lot of other work around the new house like wainscoting, door trim, window trim, bookshelves, etc. They're all white. I'm wondering if anyone can recommend a good brand of paint. I have a Graco X5 airless sprayer with fine finish tip. Is there one paint I could use for all of these jobs? It would save me a ton of time if I can just lay everything out in one day and spray it all over the course of the day or 2 days if necessary.

I've heard good things about sherwin williams and general finishes. Any advice would be greatly appreciated!

[Scott Winners]

I really really like the Zinsser primers at my house. You would be looking at one coat of primer and one or two coats of finish pigment.

The B I N primer is alcohol based, you will want the organic solvent filter on your respirator or end up drunk as a sailor, don't ask how I know.

At my house I struggle to maintain 8-9% RH in heating season, it is +71 dF and 12%RH in my downstairs office just now and I don't currently have a climate sensor upstairs with the wood stove. Probably about +80dF up there with an RH around 7-9%. Routinely see 70-80% RH in the warm months here.

Using clear pine or hemlock I find one coat of Zinsser primer (either product) with pigment coats for good color coverage, usually two coats, I don't have any trouble with warping and etcetera when the humidity changes. Don't forget to prime your endgrain when you trim to final length.

FWIW I don't care what pigment or mfr LOML picks as long as I have a good coat of Zinsser on all six surfaces of the bare board.

[roger wiegand]

I just did a vanity for a friend and used the Target EM6500WP pigmented lacquer supplemented with their crosslinker. It sprayed very easily and left a beautiful surface. It can be tinted to any BM or SWP color. With the crosslinker it is supposed to be pretty tough.

I primed with their HSF5000 primer/filler, which also sprayed easily and sanded nicely to give a perfectly flat surface.

If you decide to buy for them sign up for the email list, there is almost always a sale code in the promotions for 20-30% off.

[Ed Edwards]

This is the BEST I've found Pro Classic


Homeowners (https://www.sherwin-williams.com/homeowners) \
Paints & Supplies (https://www.sherwin-williams.com/CategoryDisplay?storeId=10151&urlLangId=&urlRequestType=Base&categoryId=21027&top_category=&top_category=&langId=-1&catalogId=11051)\
ProClassic Alkyd Interior Enamel and if you hurry 30% or more off. Look at the at the other coupons below. Ed









https://sherwin.scene7.com/is/image/sw/Jan21-8-11-Coupon-BannerNoCTA-Desktop?&qlt=92&resMode=bilin&wid=724






Product Details
Share on FacebookShare on TwitterShare on PinterestShare on Houzz (https://www.houzz.com/imageClipperUpload?link=https%3A%2F%2Fwww.sherwin-williams.com%2Fhomeowners%2Fproducts%2Fproclassic-alkyd-interior-enamel&source=button&hzid=4941&imageUrl=%2F%2Fsherwin.scene7.com%2Fis%2Fimage%2Fs w%2Fpaint_template-1%3Flayer%3Dcomp%26wid%3D250%26fmt%3Djpeg%26qlt%3D 92%252c0%26op_sharpen%3D0%26resMode%3Dsharp2%26op_ usm%3D0.0%252c0.0%252c0%252c0%26iccEmbed%3D0%26pri ntRes%3D150%26_tparam_layer_1_src%3Dsw%2F640510202-ProClassic-Alkyd-Interior-Enamel-Satin-Extra-White-1-Gallon_parent&title=ProClassic%C2%AE+Alkyd+Interior+Enamel+-+Sherwin-Williams+from+Sherwin-Williams&ref=https%3A%2F%2Fwww.sherwin-williams.com%2Fhomeowners%2Fproducts%2Fproclassic-alkyd-interior-enamel)Share this with your friendsShare with emailPrint page


https://sawmillcreek.org//sherwin.scene7.com/is/image/sw/paint_template-1?layer=comp&wid=250&fmt=jpeg&qlt=92%2c0&op_sharpen=0&resMode=sharp2&op_usm=0.0%2c0.0%2c0%2c0&iccEmbed=0&printRes=150&_tparam_layer_1_src=sw/640510202-ProClassic-Alkyd-Interior-Enamel-Satin-Extra-White-1-Gallon




ProClassic Alkyd Interior Enamel






3.5 Star rating out of 5 (https://www.sherwin-williams.com/homeowners/products/proclassic-alkyd-interior-enamel#ratings-and-reviews)
21 Reviews (https://www.sherwin-williams.com/homeowners/products/proclassic-alkyd-interior-enamel#ratings-and-reviews)
Write a Review (https://www.sherwin-williams.com/homeowners/products/proclassic-alkyd-interior-enamel#ratings-and-reviews)


Achieve a smooth and luxurious finish on interior doors and trim with ProClassic® Alkyd Interior. It delivers a high-performing finish that withstands even the toughest wear and tear. This formula goes on smooth without brush or roller marks.


Color
Color Name or Number:



Add a Color

Options
Container Size: 1 Quart 1 Gallon 5 Gallon 1 Gallon
Tooltip, select to read tip
Sheen: Satin Semi-Gloss Satin

Base: Extra White Deep Base Extra White
Change Base
Your options may be adjusted based on color selection.



Price
List Price: $77.99

Price with Coupon: $54.59

Save 30%
Get Coupon (https://sawmillcreek.org/homeowners/special-offers/)


Sign In to order online
Sales Number: 6405-10202
Product Number: B33W00221




All prices displayed are for U.S. Sherwin-Williams locations and are in U.S. Dollars. Prices do not include taxes or other fees as applicable.

Paint Calculator (https://sawmillcreek.org/homeowners/color/color-selection-tools/paint-calculator/)
Save

[Jim Becker]

I've been pretty much "standard" on ProClassic for trim work as well as for cabinetry that needs to be finished in-place. It does spray well IF you have an appropriate gun for higher viscosity finishes. In the shop, I tend to use the same Target Coatings product already mentioned....EM6500...but have also sprayed the ProClassic. My understanding is that SW's new Emerald enamel product sprays well, too, but I have not tried it.

[John TenEyck]

ProClassic should spray great with your airless rig. I really like Emerald Urethane Trim paint but it's an oil modified product, like BM's Advance, so whites are likely to yellow over time. That won't be an issue with ProClassic or the TC product.

John

[Josh Baldwin]

Thanks for all the info everyone. I'll look into these options and keep you posted on what I choose. For the cabinets I need to edge band the exposed plywood fronts. Any recommendations? I almost bought some at Rockler, but figured I'd ask to see if anyone has any experience with them. Some will be painted white and the ones on the island will be more of a blue. Thanks!

[John TenEyck]

Maple or birch iron on veneer tape will work well for the plywood edges. Both take paint well.

John

[Tom M King]

I've now sprayed both those SW products, PC, and Urethane trim, with airless. Both spray wonderfully. ProClassic will look more like a whitle factory finish, whereas the UT looks a little bit more like an old oil based trim paint. Notice I said a "little bit". That was just the best comparison that I could come up with.

With the FFLP tips, do yourself a favor, and buy a gauge for the pump to line connection. Graco, and Titan stuff use the same threads. I'm using a Titan gauge on my old Graco pump. Put the pressure in the green zone to start with, and it's probably right on. Otherwise, the pressure is so much less than regular tips that you'll end up shooting a lot of paint testing before you ever get the pressure set low enough.

[Josh Baldwin]

I've now sprayed both those SW products, PC, and Urethane trim, with airless. Both spray wonderfully. ProClassic will look more like a whitle factory finish, whereas the UT looks a little bit more like an old oil based trim paint. Notice I said a "little bit". That was just the best comparison that I could come up with.

With the FFLP tips, do yourself a favor, and buy a gauge for the pump to line connection. Graco, and Titan stuff use the same threads. I'm using a Titan gauge on my old Graco pump. Put the pressure in the green zone to start with, and it's probably right on. Otherwise, the pressure is so much less than regular tips that you'll end up shooting a lot of paint testing before you ever get the pressure set low enough.

Great, is this the one you would recommend?
https://www.amazon.com/Titan-0580495-580495-Line-Assembly/dp/B073SH3N7Z/ref=sr_1_3?crid=PJHJF6CUNQKP&dchild=1&keywords=airless+sprayer+pressure+gauge&qid=1610510453&sprefix=airless+sprayer+pressu%2Cbeauty%2C134&sr=8-3#customerReviews

[Tom M King]

That's the exact gauge I use. For my airless rig, I keep it in a low sided plastic container that came out of the Home Depot storage aisle. I keep pump oil, Pump Saver, different tips, and an old sheet in it. The tips are in a clean plastic jar. So everything I need is there, ready to go at short notice. The low, long side allows me to leave everything in the box, and just swing the pickup out to go into the container of paint.

The old sheet wraps up the pump, including the gauge when I'm spraying something. The pump is close to 30 years old. It used to be blue. Since that color change, I now keep it all wrapped up to keep any spray off of it. That's important for being able to see the gauge long term.

edited to add: I think this is the container. https://www.homedepot.com/p/Husky-Stackable-Storage-Bin-in-Black-232387/300170479 Put a piece of plywood in the bottom of it. One of my guys broke a hole in the bottom of the first one, with a leg of the pump, by sitting it down too hard.

[John Goodin]

I have the X5 with a fine finish tip and sprayed all new doors and trim with Proclassic semigloss. A professional painter was in the house and commented on how great it all looked. This was done in the driveway and then installed. Filled the holes with white Timbermate. Wouldn’t change a thing.

[Josh Baldwin]

That's the exact gauge I use. For my airless rig, I keep it in a low sided plastic container that came out of the Home Depot storage aisle. I keep pump oil, Pump Saver, different tips, and an old sheet in it. The tips are in a clean plastic jar. So everything I need is there, ready to go at short notice. The low, long side allows me to leave everything in the box, and just swing the pickup out to go into the container of paint.

The old sheet wraps up the pump, including the gauge when I'm spraying something. The pump is close to 30 years old. It used to be blue. Since that color change, I now keep it all wrapped up to keep any spray off of it. That's important for being able to see the gauge long term.

edited to add: I think this is the container. https://www.homedepot.com/p/Husky-Stackable-Storage-Bin-in-Black-232387/300170479 Put a piece of plywood in the bottom of it. One of my guys broke a hole in the bottom of the first one, with a leg of the pump, by sitting it down too hard.

Awesome, just bought it today and I'll check out that storage bin as well. Thanks for all the help!

[Tom M King]

I left out the oval plastic little trashcan, just because it fits in the box with everything else, to be used to hold soapy water for running through at cleanup, and whatever tip extensions will fit in there. That way, I'm ready to go to work with it, and the only thing that's not in there are the long tip extensions.

[Adam Herman]

putting down SW proclassic on our trim today, also have done cabinets. it's great. i usually roll and tip.

[Doug Dawson]

Great, is this the one you would recommend?
https://www.amazon.com/Titan-0580495-580495-Line-Assembly/dp/B073SH3N7Z/ref=sr_1_3?crid=PJHJF6CUNQKP&dchild=1&keywords=airless+sprayer+pressure+gauge&qid=1610510453&sprefix=airless+sprayer+pressu%2Cbeauty%2C134&sr=8-3#customerReviews

You can buy the same gauge (w/o the green highlighting) for twenty bucks at a hydraulics supply shop. I’m happy with it. But nobody ever lost their job from going with the OEM branding.