Source for figured walnut.

[Neil Gaskin]

I’m looking for an internet source for figured walnut. Would anyone have a source? Not looking for eBay or Etsy.

Thanks. Neil

[Eric Arnsdorff]

This isn't an "internet source" and is local for me. But they may ship it out for you.

https://www.jeffrieswoodworks.com/

I just finished a stair newel and handrail project using some very nice figured walnut from Jefferies.

[John K Jordan]

https://www.jeffrieswoodworks.com/
I just finished a stair newel and handrail project using some very nice figured walnut from Jefferies.

Jefferies is fairly high on some wood but at times they do get some very nice stuff. I got some quilted maple once and the last trip some nice figured 8/4 sapele. The plank on the left is 14" wide, the other about 10" - I plan to use them for woodturning.

449104

Other times I can't find much with figure. They get new wood in all the time so some is luck I guess. I'm still looking for more maple like this. Eric, if you ever see any like that let me know!!

449105

JKJ

[John K Jordan]

I’m looking for an internet source for figured walnut. Would anyone have a source? Not looking for eBay or Etsy.

Thanks. Neil

Neil, what sizes and quantities are you looking for?

JKJ

[Ed Mitchell]

There's tons of figured walnut out there.
https://nwtimber.com/trophy-boards
https://www.cookwoods.com/collections/walnut-claro
https://www.keimlumber.com/domestic-wood-library/claro-walnut
https://woodnut.com/shop/
https://gobywalnut.com/

[Neil Gaskin]

I’d have to check the drawing I made but from memory roughly 36” long by 7-8” wide. Need 4-5 pieces. Using for drawer faces for a desk I’m making my wife.

[Neil Gaskin]

I’d have to check the drawing I made but from memory roughly 36” long by 7-8” wide. Need 4-5 pieces. Using for drawer faces for a desk I’m making my wife.

[Scott Winners]

Of the places Ed mentioned above I am a satisfied customer of both goby and cook. I have no idea how much shipping would be on what the OP is looking for.

[John K Jordan]

I’d have to check the drawing I made but from memory roughly 36” long by 7-8” wide. Need 4-5 pieces. Using for drawer faces for a desk I’m making my wife.

If you don't find enough that suits you or matches up well, you might consider buying figured veneer or resawing a figured board in to thin veneer-link pieces. You could bookmatch pieces on the drawer fronts for a stunning look.