Hammer A3-41A Base Dimensions

[James Cheever]

Hi All -

I’m expecting delivery of my A3-41A jointer in mid to late January. If someone has this machine (or the A3041 jointer / planer), can you tell me the dimensions of the base? I bought a Bora mobile base for it (instead of the Hammer Mobility Kit) and I like to get it setup ahead of time so I can place the jointer directly on its base.

Thanks.

[Robyn Horton]

Welcome to the Hammer club James , I have the A3-31 but think the base dimensions are not the same or I could get them for you

[William Chain]

We might be in the same container that landed in DE. I am expecting the A3-41 next week! I have the manual but the base dimensions are not in there. I got the mobility kit, I’m hoping I can build a ramp to get it off the pallet.

[Robyn Horton]

I have found a spec sheet for the Hammer A3- XX series but the pdf file is too large for me to post as an attachment. I'll pm you the sheet or may need an email address to send it to.

[James Cheever]

Thanks, Robyn. PM sent.

[Peter Mich]

The base of my A3-41 measures 24 7/8 x 23 3/8.

On second inspection, I see now that you have the A3-41A jointer only, so I am not sure the dimensions are the same.

[Erik Loza]

The base of my A3-41 measures 24 7/8 x 23 3/8.

On second inspection, I see now that you have the A3-41A jointer only, so I am not sure the dimensions are the same.

Late to the conversation but base dimensions will be the identical. A3-41A uses the same chassis as the regular A3-41.

Erik