Jason Buresh
12-15-2020, 9:49 PM
My mom asked me to build her a cabinet. Here is the progress.
447224447225
Decided to go with a glued and screwed rabbet joint for this build. Its not a family heirloom, but want it to last longer than an ikea cabinet. Wood is a all 5/4 pine panels and the rabbets are cut with a 78, then pilot holes are drilled with a no 2a millers falls and counter sunk with a bit and brace.
447226447227
Tonight the bottom panel was rabbeted on 3 sides for the "carcass" to fit into. This is where I left off for now. Next step will be to attach the bottom, then fit the top and build some doors.
447228
Definitely not the most glamorous thing ever built, but there has been quite a bit of effort put into it so far.
447224447225
Decided to go with a glued and screwed rabbet joint for this build. Its not a family heirloom, but want it to last longer than an ikea cabinet. Wood is a all 5/4 pine panels and the rabbets are cut with a 78, then pilot holes are drilled with a no 2a millers falls and counter sunk with a bit and brace.
447226447227
Tonight the bottom panel was rabbeted on 3 sides for the "carcass" to fit into. This is where I left off for now. Next step will be to attach the bottom, then fit the top and build some doors.
447228
Definitely not the most glamorous thing ever built, but there has been quite a bit of effort put into it so far.