Jonathan McCalip
12-15-2020, 10:23 AM
I have 2x 900mmx600mm lasers used mostly for cutting. I'm moving into a new building that has a 20ft high roof that will let me vent straight up.
The harbor freight says it's 1500CFM and 9" of pressure. Is that enough to run both my lasers? My alternative plan is to run a 750w chinese blower on each laser. The advantage to this is that I can wire them to 220v. What solution do you think is better? How loud is the chinese compared to the 2HP HF?
Link to the 1hp chinese: https://www.ebay.com/itm/750W-Dust-Smoke-Exhaust-Blower-Fan-for-Laser-Engraving-Centrifugal-Blower-2300Pa/264958021252?hash=item3db0ba8e84:g:S0UAAOSww-Zfr97m
The harbor freight says it's 1500CFM and 9" of pressure. Is that enough to run both my lasers? My alternative plan is to run a 750w chinese blower on each laser. The advantage to this is that I can wire them to 220v. What solution do you think is better? How loud is the chinese compared to the 2HP HF?
Link to the 1hp chinese: https://www.ebay.com/itm/750W-Dust-Smoke-Exhaust-Blower-Fan-for-Laser-Engraving-Centrifugal-Blower-2300Pa/264958021252?hash=item3db0ba8e84:g:S0UAAOSww-Zfr97m