Delta Cabinet Saw Belts

[fritz eng]

Read about the importance of replacing belts as sets of 3 with OEM belts. My belts are labeled "Delta 49-124-06-86". Anyone recommend a reliable source while waiting for Delta to respond? My 10" cabinetmakers saw was made in Quelph Canada and the company is no longer around. Thanks

[Richard Coers]

The importance of matched sets has diminished over what it once was. Modern manufacturing methods are much better. OEM from Delta now means Chinese belts is my assumption. If they are even available. Aftermarket, or even automotive belts would be fine with me.

[Stephen Rosenthal]

Try vbelts4less.com. Can’t guarantee they’ll have what you need, but I’ve been pleased with their products, prices and service when I’ve needed belts.

[Bill Dufour]

Go to the dollar store and buy a cloth tape measure. They are great for measuring belts and pulley spacing if you do not have the belt.
Bil lD

[Steve Rozmiarek]

Take your old belts to your local auto parts or tractor parts store. Get a Gates replacement set that match. Easy peezy.

[Jon Endres]

Gates belts. Don't bother with OEM.

[Dave Sabo]

I think Gates was OEM at one point.

[fritz eng]

Received a set of 3 matched Gates replacement belts, AX24 for my Delta cabinet makers saw.. These are notched (as were the original belts) and are perfect fit.

https://www.biedlers-belts.com/

[Rollie Meyers]

I think Gates was OEM at one point.


They were, at least in the Rockwell era, saved a lot of money when replacing the Rockwell OEM belt on the vari-drive of my 20" wood/metal bandsaw with a Gates belt, the Gates number was embossed in the belt.