length of SCM outrigger table

[Acharya Kumarswami]

Can anyone tell me the length of the SCM outrigger tables. From photos, on all the mid-range saws, they seem to be the same length, which to me looks like 1500mm (measured from the blade). Felder has 1300 and 1500. What's the size SCM puts on their US sliders? Thank you.

[Kendall Scheier]

The outrigger for my SC4-E is 48” before it attaches to the sliding carriage. The end of it sticks out 62” from the blade.

[Jim Becker]

The exact specifications are on the SCM/Minimax web site. This document is for the Minimax series....

https://www.scmgroup.com/products/docs/artis/minimax/Minimax%20SI%20X%20e%20gamma%20Elite%20S/Minimax%20SI%20X%20and%20Elite%20S%20range_rev00_f eb20_Eng.pdf

[Acharya Kumarswami]

Thank you. That's very helpful.

[Kendall Scheier]

Absolutely