ChrisA Edwards
10-27-2020, 6:59 PM
Built this little add on, so wherever I park my lathe for use, I have good overhead lighting.
I can rotate the arm so the light can be positioned directly above the spindle to about 8 inches closer to me, so it illuminates the business side better.
I can remove it with two knobs.
The LED light is very lightweight, otherwise I would probably have to have beefed up the support.
https://youtu.be/0F-5Ueu3fbw
https://www.amazon.com/Feit-73991-4-Feet-Light-48-Inch/dp/B00MJUCU2A/ref=sr_1_1?dchild=1&keywords=Feit+73991+2+Lamp+4-Feet+LED+Shop+Light%2C+48-Inch%2C+4100K&qid=1603838605&sr=8-1
I can rotate the arm so the light can be positioned directly above the spindle to about 8 inches closer to me, so it illuminates the business side better.
I can remove it with two knobs.
The LED light is very lightweight, otherwise I would probably have to have beefed up the support.
https://youtu.be/0F-5Ueu3fbw
https://www.amazon.com/Feit-73991-4-Feet-Light-48-Inch/dp/B00MJUCU2A/ref=sr_1_1?dchild=1&keywords=Feit+73991+2+Lamp+4-Feet+LED+Shop+Light%2C+48-Inch%2C+4100K&qid=1603838605&sr=8-1