Cabinet Door Catches

[Mike Burke]

I am building a TV Cabinet and have two smaller inset doors that I am needing to put some kind of catch on. I'm using free swinging hinges. I dislike the cheap magnet catches the hardware store has.
Asking for suggestions on what would be a good choice. Something small and inconspicuous that I could mount on the top corner of the door.
Any suggestions for a nice door catch for these inset doors ?
Thanks
441919

[Steve Eure]

Google "bullet catches". I've used them and they work great. Look nice too.

[Brad Shipton]

Horton Brass ball catches are nice, but kind of finicky to install.
https://www.horton-brasses.com/ballcatches.asp

[Phil Gaudio]

Brusso ball catch. Top shelf hardware.

[Don Peters]

FWW did an article about hidden magnetic catches awhile back. These are cheap, work great, are totally invisible, and are widely adaptable. This is my go-to catch for the kind of doors you're showing. Buy the magnets at K&J Magnetics. https://www.finewoodworking.com/membership/pdf/251829/011268044.pdf

dp

[Phil Gaudio]

Magnetic catches I used on my last project: magnets are embedded in door and stop block with leather dots used for softening the close. For the OP's application, I think the ball catch would be better. I am working on a project as we speak with doors similar to the OP's and I have opted for the Brusso ball catches: inconspicuous.
https://i.postimg.cc/D0n5P3Ng/IMG-2200.jpg (https://postimages.org/)

[Mike Burke]

Excellent
Thanks for the suggestions. I like the ball/bullet catches. Thanks

[Mike Burke]

Looking at these ball catches. What size would I use for 3/4” thick doors ?
Thanks

[Phil Gaudio]

i think 1/4" catches would be fine.



Looking at these ball catches. What size would I use for 3/4” thick doors ?
Thanks