lowell holmes
09-09-2020, 7:28 PM
I was playing with a 1/4 X5/8 stick of wood and my miter saw was sitting there. I sawed the stick in halve and made a 3" square.
I cut 45 ends on the two pieces and made a square. I joined the pieces with mounting tape. I now have a small square to use when I need it.
I had backed my F150 truck into a tree and it damaged my bumper tearing the license plate a bit loose. I bought the tape to hold the license plate frame to the bumper. It works. The tape is 1/8 X 3/4 and is very sticky.
I am going to fix that bumper when I get to it.
I cut 45 ends on the two pieces and made a square. I joined the pieces with mounting tape. I now have a small square to use when I need it.
I had backed my F150 truck into a tree and it damaged my bumper tearing the license plate a bit loose. I bought the tape to hold the license plate frame to the bumper. It works. The tape is 1/8 X 3/4 and is very sticky.
I am going to fix that bumper when I get to it.