Skil Flooring Saw

[Mike Wilkins]

If anyone out there has one of these saws, I have a question for you.
How do you remove the blade from the saw. I got the machine second hand without an owners manual. I have removed blades from table saws and circular saws dozens of times over the years, but I am stumped and flustered.
Thanks in advance.

[Lee Schierer]

Here is what the manual says
changing the Blade
NoTe:
Clean blade of a
ny excess oil before installation.
1. Slide the saw assembly back to its farest position. This is
the position in which the bla
de can be removed from
saw.
2. Using a phillips head screwdriver, remove the rear screw
on the blade bolt cover and rotate th
e cover clear of the
blade bolt.
3. Push and hold in the arbor lock to
lock the blade in
place. Using the hex wrench (included), turn the blade
bolt clockwise to remove it.
NoTe:
The blade bolt has a left hand thread.
5. Remove the blade bolt and blade collar.
6. Remove blade by sliding it down through the ke
rf insert
and out through the underside of the table.
NoTe:
Inner washer does not need to be removed.
7. Install a 4-3/8" (110mm) blade.
NoTe:
Make sure the rotation arrow on the blade
matches the rotation arrow on the upper guard.

See pages here: https://usermanual.wiki/Skil/Skil3600UsersManual446290.1906739958