Earl McLain
09-06-2020, 1:35 PM
Good afternoon,
Going to look at a Jet 1642 shortly. If all is in order--it will likely follow me home. It's the 110v version, looks to have a Delta S1 inverter. I'll be using a 20 amp circuit, with nothing else running on it while the lathe is on. Should that circuit have GFCI or not? If it is dependent on what type of GFCI--what is suggested. Seems like i've seen some VFD/GFCI discussions, but i'm not coming up with anything this morning.
Thanks,
earl
Going to look at a Jet 1642 shortly. If all is in order--it will likely follow me home. It's the 110v version, looks to have a Delta S1 inverter. I'll be using a 20 amp circuit, with nothing else running on it while the lathe is on. Should that circuit have GFCI or not? If it is dependent on what type of GFCI--what is suggested. Seems like i've seen some VFD/GFCI discussions, but i'm not coming up with anything this morning.
Thanks,
earl