Ken Peterson
09-04-2020, 6:14 PM
This acrylic is sold at Home Depot. Will this work for a CNC carved edge lit sign?
Ken
tim goudy
09-23-2020, 10:56 PM
It should work fine. You may need to polish the edge where the lights are tho. My experience with big box acrylic is quite a few scratches. You can polish those out with Novus polish.
if you get LED “hotspots” due to a clear flame type polished edge, you can hit the edges with something like 220 sandpaper to give the edge a more satin or matte finish.
Hope this helps!
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.