jon catton
08-25-2020, 7:03 PM
Hi all,
Its been a while but I am hoping you guys may offer some help.
Bit of a technical one.
I have an LTT ILS 3 Laser cutter, sold in the US as a Pinnacle Accuris I think by Signwarehouse.
On power on the display panel stops at :
Initial okay !
Wait a moment
Self Test # = 2B
i.e. It does the normal "getting ready to jump to life display panel activity" but freezes at this point - 2B
No mechanical X/Y movement, no beeps, nothing at all. Seemingly dead.
I have unplugged all connectors and reseated. checked interlocks etc
Very strange one !
Anyone know what the 2B stage of the self test is ?
Kind regards,
Jon.
Its been a while but I am hoping you guys may offer some help.
Bit of a technical one.
I have an LTT ILS 3 Laser cutter, sold in the US as a Pinnacle Accuris I think by Signwarehouse.
On power on the display panel stops at :
Initial okay !
Wait a moment
Self Test # = 2B
i.e. It does the normal "getting ready to jump to life display panel activity" but freezes at this point - 2B
No mechanical X/Y movement, no beeps, nothing at all. Seemingly dead.
I have unplugged all connectors and reseated. checked interlocks etc
Very strange one !
Anyone know what the 2B stage of the self test is ?
Kind regards,
Jon.