steven c newman
08-25-2020, 4:39 PM
Like replacing the old Craftsman 6" grinder with a better one...
439700
While trying to "fish" bolts through....found a small nail....under the plank...with the back of my hand...
439701
OUCH! Then removed the old Monarch vise...it was back behind the sanding center, where I could not access it...so...
439702
Bolt it down to a new base....base can be clamped in the bench's vise..
439703
5/4 Ash batten,,,3 screws to attach it to the base of 3/4" plywood....3 bolts to attach the vise to the base..
439704
Need to place this on a shelf, and out of the way...Vise?
439705
Monarch No. 215....has a 10 45 number stamped in the side...
Next, made a base for the old grinder, now New Buffer..
439706
There IS a power strip behind the bench ( mainly for lights and the bandsaw)
439708
Just need a spot on a shelf to stash this on, as well....
Note: wife's dad inherited the vise from his uncle....then I wound up with it....still work away like new...Thinking that 10 45 MIGHT be a casting date?
439700
While trying to "fish" bolts through....found a small nail....under the plank...with the back of my hand...
439701
OUCH! Then removed the old Monarch vise...it was back behind the sanding center, where I could not access it...so...
439702
Bolt it down to a new base....base can be clamped in the bench's vise..
439703
5/4 Ash batten,,,3 screws to attach it to the base of 3/4" plywood....3 bolts to attach the vise to the base..
439704
Need to place this on a shelf, and out of the way...Vise?
439705
Monarch No. 215....has a 10 45 number stamped in the side...
Next, made a base for the old grinder, now New Buffer..
439706
There IS a power strip behind the bench ( mainly for lights and the bandsaw)
439708
Just need a spot on a shelf to stash this on, as well....
Note: wife's dad inherited the vise from his uncle....then I wound up with it....still work away like new...Thinking that 10 45 MIGHT be a casting date?