View Full Version : laguna 1836 rotary adapter for vacuum chucking
joe zarnitz
07-10-2020, 1:55 PM
how can i remove the small hose from the end and replace it with a quick disconnect fitting thats on my vacuum pump ----tks,joe
Brice Rogers
07-10-2020, 4:18 PM
I'm not very familiar with the 1836 rotary adapter. But I suspect that if you took the hose to Harbor Fright or Home Despot that you could find a barbed fitting to jam into the hose where the other end is a standard NPT fitting that would screw into a mating quick disconnect fitting on your pump.
If your rotary adapter has a threaded fitting that attaches to your hose, then unscrew it and figure out the thread count. If it doesn't have a threaded fitting, then you need to go with a barbed fitting that connects to something useful.
William C Rogers
07-10-2020, 4:52 PM
how can i remove the small hose from the end and replace it with a quick disconnect fitting thats on my vacuum pump ----tks,joe
I didn’t remove the laguna hose. It fit into the braided tubing and I put a clamp on it for added sealing.
436592
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.