PM 66 motor removal, tips or advice?

[Lloyd McKinlay]

The motor on my 1986 PM 66 requires repair. At first glance it appears to be a straightforward procedure but we all know things are often not what they seem. Any advice or suggestions to make removal and replacing as easy and trouble free as possible?

[Bill Dufour]

If that is the table saw it is a c-mount motor. You may have to remove the pulley first. I would cut the power cord as close to the motor as possible. Add a short pigtail cord at the bench. Ad a inline female receipticale on the stub cord left on the machine.
Bill D.

[Chris Sherwood]

https://www.mmtoolblog.com/post/pm66-motor-replacement-3ph-to-1ph

This might help. I just removed mine, but it was the first time so I don’t qualify as an expert.