Bathroom vanity

[Andrew Jordan]

Does anyone have a bathroom vanity plan - ideally about 42" wide?

[David Utterback]

A typical face frame cabinet plan will work. You may need adjustments for plumbing and bowl. Can you take measurements from an existing cabinet? Made mine from cherry with panel end. The other end is against a wall.

[Lee Schierer]

I made a similar sized vanity for my son and his wife. I have a cad drawing of this vanity that is 42" if you would like it.
435454
The doors and drawers are inset to the face frame.

[Andrew Jordan]

I made a similar sized vanity for my son and his wife. I have a cad drawing of this vanity that is 42" if you would like it.
435454
The doors and drawers are inset to the face frame.

That looks perfect, Lee! Thank you!

[Bill Dufour]

My wife has said that modern (1970's onward) vanitys and kitchen cabinets the drawers are too tall. One on the bottom for upright shampoo bottles 3-4 above it only 2-3 inches tall. Other wise stuff gets buried in the drawers. A proper machinist tool box will follow this design.
Our 1949 kitchen and bath cabinets have four drawers. Modern ones would only have three or even two drawers to save on hardware costs.
Bill D.

[Lee Schierer]

Here is the cad file for the 42 inch vanity.436039