lowell holmes
05-23-2020, 2:34 PM
I have a pair I made.
Make two legs from 1X4X30"
And two cross pieces 30" as well
Make two H pieces with one nailed at the top and one nailed maybe 9 or 10" from the bottom.
Hinge the H pieces at the top with metal hinges.
Put nylon rope through holes in the bottom cross pieces, tie a knot at the hole.
The resultant saw horse will support good weight. I have stacked 1X12 boards on top of the H pieces.
I thought I would share the design.+
Make two legs from 1X4X30"
And two cross pieces 30" as well
Make two H pieces with one nailed at the top and one nailed maybe 9 or 10" from the bottom.
Hinge the H pieces at the top with metal hinges.
Put nylon rope through holes in the bottom cross pieces, tie a knot at the hole.
The resultant saw horse will support good weight. I have stacked 1X12 boards on top of the H pieces.
I thought I would share the design.+