PSA - Great Little Task Light

[Rob Luter]

I saw these on the Stumpy Nubs YouTube Channel and ordered one up. It lives up to the hype. Super bright and it has a very strong magnet. For $20 you can't go wrong. It's a permanent addition to my band saw. Get them at woodturnerswonders dot com. No affiliation.

https://cdn.shopify.com/s/files/1/0388/0669/products/Galaxy_2400x.jpg

[Bruce Page]

Rob, in most cases direct links are encouraged.

[Mike Henderson]

Here's a link to the lamp (https://woodturnerswonders.com/collections/lamps/products/galaxy-multipurpose-lathe-lamp). Looks like a good product.

Note, however that shipping is $5.25

Mike

[Rob Luter]

Rob, in most cases direct links are encouraged.

I wasn't sure and I didn't want to run afoul of the rules. Thanks Mike.

[Jim Becker]

It's pretty nice that this format of lamp has also (and logically) moved to the LED format. I have an old halogen magnetic lamp on my bandsaw and when (not if) the hotter-than-hades bulb dies, I'll be replacing the whole thing with an LED type. I have inexpensive LED task lighting over my guitar bench because my body blocks some of the overhead light there and it's amazing what you can get for a very small chunk of change.

[Bruce Page]

I wasn't sure and I didn't want to run afoul of the rules. Thanks Mike.

Here's some info from the TOS:

3. External Linking
Links to other websites are allowed in posts. In fact, they are encouraged. However, links for the sole purpose of marketing, generating traffic to a site, or any other commercial advertisement deemed to solicit commercial benefit are not allowed. Links to other public or private forums are not allowed. Links should be submitted as references, for the sole purpose of generating or supporting discussions on SawMill Creek.

[Larry Frank]

I bought a very similar one on Amazon for about $15 and free Prime shipping.

[Rob Luter]

Here's some info from the TOS:

3. External Linking
Links to other websites are allowed in posts. In fact, they are encouraged. However, links for the sole purpose of marketing, generating traffic to a site, or any other commercial advertisement deemed to solicit commercial benefit are not allowed. Links to other public or private forums are not allowed. Links should be submitted as references, for the sole purpose of generating or supporting discussions on SawMill Creek.

Thanks Bruce

[John Goodin]

I have the same model but in white on my band saw and it works great It seems it was marketed as a sewing machine lamp.

[Jim Dwight]

I don't have this but it looks similar for less with free shipping.https://www.amazon.com/Bonlux-Machine-Gooseneck-Magnetic-Mounting/dp/B014STNJYW?ref_=fsclp_pl_dp_2

[Ed Gurganus]

Another one (actually two) from Amazon -- https://www.amazon.com/EVISWIY-Lighting-Multifunctional-Gooseneck-Workbench/dp/B07ZNR9JCT/ref=sr_1_10?crid=3OZSFEDJLQH5Q&dchild=1&keywords=magnetic%2Bled%2Bwork%2Blight&qid=1589922947&sprefix=magnetic%2Bled%2B%2Caps%2C180&sr=8-10&th=1

I don't personally have any experience with these but they get good reviews and two for $16 would be hard to beat