Scott Bernstein
05-08-2020, 7:53 AM
I have the jet benchtop spindle sander. Fairly happy with it; constructed better than the
Rigid unit. I am having some chatter on the spindle, especially towards the peak of the
upward stroke of the spindle. Any other adjustments that can be made other than making sure
the sandpaper is on as straight as possible? It is not terrible, but far from
perfect. I haven’t checked the runout on the bare spindle, but I do
plan to do this too.
SB
Rigid unit. I am having some chatter on the spindle, especially towards the peak of the
upward stroke of the spindle. Any other adjustments that can be made other than making sure
the sandpaper is on as straight as possible? It is not terrible, but far from
perfect. I haven’t checked the runout on the bare spindle, but I do
plan to do this too.
SB