secretary deck hinge locations

[Brian Knop]

Need to location the hinges for the slant top on the Secretary desk I'm making and I really don't want to screw it up. I little advise from someone who has made one would be appreciated.
Thabks

[Mark Rainey]

Mortised hinges, allowing center of barrel to be 1/32 inch beyond edge. 432159432160432161432162
Total gap 1/16 inch ( Two hinges )

[Richard Coers]

The best way to do this is to make a mock up. As with any butt hinge, you don't want it too tight near the hinge so you make sure not to get a binding situation. We have no idea what kind of hinge you are using, so advice will just be guess work.

[Brian Knop]

Hinges are from Horton and Brass look just like the ones Mark shows. But I think a mock up is a good idea.