Adam Herman
04-27-2020, 2:57 PM
i am looking to replace the knife hinges on a cabinet I used for a vanity in our bath remodel.
they are 1 in from center of pivot to the back of the hinge, 3/8 wide and 1 7/8 total length with 2 screws about 1.85 apart about 9/16 from the pivot end. about 1/4 total thickness.
any one know who has a selection of knife hinges?
these are stamped steel, loose, bent. etc.
this is the closest i have found, but there are not nearly enough dimensions on this site for them. waiting for a call back.
https://restorationsupplies.com/offset-knife-hinge-left-or-right/
they are 1 in from center of pivot to the back of the hinge, 3/8 wide and 1 7/8 total length with 2 screws about 1.85 apart about 9/16 from the pivot end. about 1/4 total thickness.
any one know who has a selection of knife hinges?
these are stamped steel, loose, bent. etc.
this is the closest i have found, but there are not nearly enough dimensions on this site for them. waiting for a call back.
https://restorationsupplies.com/offset-knife-hinge-left-or-right/