Ashe vase with wedges

[roger fischer]

Today l show you how i made a Vase out of ash tree wood


The log was 164 KG at the beginnig


The hollowing was quite hard when i got closer to the core wood, the tool was jumping a lot


il use several wooden wedges the stop the big crack and in the core wood to avoid the cracks there as well


I sanded it up to 500 grit, then i used woodturner oil for the first finish to dry it much slower


High: 51cm
Diameter: 46cm
Thickness: 10mm


hope you enjoy it


https://youtu.be/dlTBJG71LRY


Kind Greetings
Roger

431295431296431297431298

[Eugene Dixon]

Very nice, for sure.

[Robert D Evans]

I think you need a bigger drill bit. Nice job.

[roger fischer]

Thank you for your comment

Im not Sure how big the drillbit can be for my Machines, thus one is 72mm
Best regards Roger

[Jenny Trice]

What is the technique for putting the bowties into a turning? Specialty tools? Are there any resources (tutorials, demos or videos) to show this?

Nice work!

[William C Rogers]

That is impressive. Very well done.