View Full Version : Miter saw fences
Jason White
04-20-2020, 5:44 PM
Does anybody make miter saw fences similar to the heavy duty ones that Biesemeyer made a long time ago?
Jason430881
Bobby Robbinett
04-21-2020, 7:53 AM
Fast cap and a few others do. I personally use the Fast Cap Best Fence system. The cabinet shop that I just started working in part time use the same Best Fence setup on their upcut saws. Very nice system and lots of adjustment.
Bruce Lowekamp
04-21-2020, 8:37 AM
I got the Kreg Trak and Stop Kit and built my own. The only challenge I had with it was the cabinets it is on (re-used kitchen cabinets) not being perfectly in-plane, which would be a problem with an off-the-shelf system as well. But I love just being able to set a length, trim one end, then cut the other to length.
Bruce
Jason White
04-21-2020, 4:32 PM
Yes, the 3-way adjustment features on the FastCap are very interesting. I've built my own fences in the past and can never get them dialed in perfectly, despite much shimming and cussing.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.