Bill Dufour
04-19-2020, 8:10 PM
I replaced the belts on my tablesaw with the Harbor freight flex twist belts. The segmented multi link type. Since I have the top off I thought I would run the arbor with no blade for about one hour then tighten up the belts by moving the motor. Does this sound like enough time to stretch them enough to make a difference?
It is not the original motor so a little hard to keep in line working just from the bottom. Best to do it with the top off.
Bil lD
I tried google and all I got were abdominal belts for exercising and lifting.
It is not the original motor so a little hard to keep in line working just from the bottom. Best to do it with the top off.
Bil lD
I tried google and all I got were abdominal belts for exercising and lifting.