Thomas M Eddins
04-18-2020, 9:03 AM
I have a Walker Turner 1100 Drill Press with Power Feed that I am doing a complete tear down and restoration. For the most part the the tear down has gone
fine with exception of removing the Feed Pinion (Part number HD80). After removing the Return Spring Housing and Spring, I thought I would be able to remove
the Feed pinion and power feed intact. However with using an excessive amount of force (Bigger Hammer) the feed pinion has not budged.
The way I read the schematics of the feed pinion and power feed, i dont see anything that should be preventing an easy removal of the pinion feed and intact power feed.
Am I missing something - Do I need to completely disassemble the power feed in order to remove the feed pinion?
Thanks - Tom
fine with exception of removing the Feed Pinion (Part number HD80). After removing the Return Spring Housing and Spring, I thought I would be able to remove
the Feed pinion and power feed intact. However with using an excessive amount of force (Bigger Hammer) the feed pinion has not budged.
The way I read the schematics of the feed pinion and power feed, i dont see anything that should be preventing an easy removal of the pinion feed and intact power feed.
Am I missing something - Do I need to completely disassemble the power feed in order to remove the feed pinion?
Thanks - Tom