laguna 18/36-2hp

[joe zarnitz]

can you tell me how many amps,it says it draws----tks

[Steve Eure]

The plate on my motor says 5.2 amps at 220 volts, 3 phase. 15 Kw. Manual recommends 15 amp receptacle. I installed a 20 amp on mine.

[ChrisA Edwards]

My electrician friend just swapped out a 50A GFCI breaker on my sub panel that my old Oneway 1224 110v would trip.

After he did this, he told me to power on my Laguna 24/26, that I had just purchased. He load tested the circuit and the lathe pulled around 5A.

My 220v SawStop pulled 4A and the big surprise was my Hammer A3-31 which pulled 6A but had a start up spike of 53A.