Joe Hendershott
04-10-2020, 4:38 PM
I have some benches I've made and need some larger glides. The legs are bent laminations that are 2.75" wide and 20mm thick. I've been looking for some larger diameter glides and have not be able to find an exact match. I will have threaded inserts in the legs to hold the glides. They should be between 3/8 and 1/2 inch thick. I'd prefer some round glides about 2 1/2 inches and have found nothing. Plenty of squares, rods, etc. in large quantities.
So asking what the opinions are on buying some urethane sheet and cutting myself. I have no idea on what grade of urethane I should use and there seems to be many different grades.
Anyone have some knowledge about this? I just need something that can be outdoors, large enough to support the load and not look like the 20 for $3 crap on Amazon.
So asking what the opinions are on buying some urethane sheet and cutting myself. I have no idea on what grade of urethane I should use and there seems to be many different grades.
Anyone have some knowledge about this? I just need something that can be outdoors, large enough to support the load and not look like the 20 for $3 crap on Amazon.