Michael Todrin
03-27-2020, 4:56 PM
I have been working with Japanese planes for several years and they are now my go to planing tools. I am currently working on a cherry cabinet and it was time to smooth the panels after cutting all the joinery. This is one of the most pleasant stages of the project, after test fits are done and everything is tight to make the parts smooth as silk. So I pick up one of my go to planes to sharpen for the task and I notice that the very thin flat in front of the Ura has disappeared. I have read about the solution to this situation but have never executed it. Ura Dashi. So I mounted a 3 pound sledge hammer in a vice, placed the iron on it and started tapping away at the soft iron.
428944
Astoundingly and pleasantly not only did the iron not break but with a little work on the stone, a new landing appeared in front of the Ura. Success!
428946
And the evidence.
428945428947
428944
Astoundingly and pleasantly not only did the iron not break but with a little work on the stone, a new landing appeared in front of the Ura. Success!
428946
And the evidence.
428945428947