Rich Tesoroni
12-23-2005, 11:17 PM
I recently bought a lumber rack from a house and buried in the lower part of the rack was a new 50" front rail set for a PM 66.
My older General has a 30" Paralock. I like the Paralock, but eventually the nylon washers and all will wear out, so I guess I've got a replacement.
Does the rear rail on a Biesemeyer do anything but support the outfeed table? Biesemeyer has some closeout 42" fences, so it would seem that with one of those and a length of either angle iron or tube stock for a rear rail, I'm in business.
Anything wrong with what I'm thinking (the fence should fit). I know, either I repaint or I'll have a green saw, gold rail, and a white fence. Once it's covered in sawdust, it might be less noticeable.
Thanks,
Rich
My older General has a 30" Paralock. I like the Paralock, but eventually the nylon washers and all will wear out, so I guess I've got a replacement.
Does the rear rail on a Biesemeyer do anything but support the outfeed table? Biesemeyer has some closeout 42" fences, so it would seem that with one of those and a length of either angle iron or tube stock for a rear rail, I'm in business.
Anything wrong with what I'm thinking (the fence should fit). I know, either I repaint or I'll have a green saw, gold rail, and a white fence. Once it's covered in sawdust, it might be less noticeable.
Thanks,
Rich