John Menard
03-19-2020, 11:13 AM
Hey everyone,
I recently bought a Grizzly G0771Z table saw and am in the process of setting it up. I’m running into an issue where the motor hits the motor cover as I raise the blade beyond beyond 2 3/4” inches. The motor cover is flexible enough that the blade will continue to rise, but it’s forcing the blade to come out of 90*.
At full blade extension, you can see that the motor extends beyond the cover opening.
428362
428363
I've reached out to Grizzly but haven't heard back yet. In the meantime, are other G0771Z owners experiencing this issue? Could someone share a picture of their motor location at full extension?
Thanks!
-John
I recently bought a Grizzly G0771Z table saw and am in the process of setting it up. I’m running into an issue where the motor hits the motor cover as I raise the blade beyond beyond 2 3/4” inches. The motor cover is flexible enough that the blade will continue to rise, but it’s forcing the blade to come out of 90*.
At full blade extension, you can see that the motor extends beyond the cover opening.
428362
428363
I've reached out to Grizzly but haven't heard back yet. In the meantime, are other G0771Z owners experiencing this issue? Could someone share a picture of their motor location at full extension?
Thanks!
-John