Steven Shelby
12-23-2005, 11:19 AM
As mentioned on a previous thread, I have been in search of a new Table Saw. you all have been very helpful with your thoughts and suggestions.
I was originally leaning toward the Delta 36-717. But I did more research and listened to the input from the Creek. As a result, the Delta fell off the list. It came down to the new Craftsman hybrid and the Grizzly 1023SL. Thanks to Tod for reminding me (twice) the two most important factors in a TS. I'm going with the Griz because it has more of both.
I'm happy that, as it turns out, the issue of 220v power is not an issue. I was planning on upgrading power in the shop anyway. Now the electrician has one more thing to do. So as soon as I talk with the electrician to confirm that he can put a 220 where I want it, I'm pulling the trigger!!!!
Thanks again to everyone for all your help!:D
I was originally leaning toward the Delta 36-717. But I did more research and listened to the input from the Creek. As a result, the Delta fell off the list. It came down to the new Craftsman hybrid and the Grizzly 1023SL. Thanks to Tod for reminding me (twice) the two most important factors in a TS. I'm going with the Griz because it has more of both.
I'm happy that, as it turns out, the issue of 220v power is not an issue. I was planning on upgrading power in the shop anyway. Now the electrician has one more thing to do. So as soon as I talk with the electrician to confirm that he can put a 220 where I want it, I'm pulling the trigger!!!!
Thanks again to everyone for all your help!:D