CMT333 drill bit recommandation.

[Jan Smith]

Hello,

I bought a CMT333 without drill bits and I need 1/8” (3mm)
drill bits for the wood screws for the blum 38h hinges I am planning to use.
The ones CMT offers and are mentioned in manual are all bigger,
at least the ones I could find.
Which I assume are for the ones with plastic inserts.
Contacted CMT but still have to hear back from them.
Does anyone have a recommendation?

Thank you.

[Jamie Buxton]

Here's a page on the CMT site showing 3mm boring bit in the left-hand spiral. https://www.cmtorangetools.com/na-en/industrial-boring-bits/solid-carbide-dowel-drills-2

[Jan Smith]

Here's a page on the CMT site showing 3mm boring bit in the left-hand spiral. https://www.cmtorangetools.com/na-en/industrial-boring-bits/solid-carbide-dowel-drills-2

Guess my searching skills are not as good as I thought.
Thank you very much.