Router Table Saw Wing Extension.

[Mark Eisen]

I have a cast iron router table-saw extension wing, that I dont use, as it a PITA to use, always in the way of the T/S.
468585

Some reason photo will not attached

I was thinking about making one out of MDF approx 685mm x 600mm
The cast iron one is only 685mm X 255mm
My router is a Triton, I have the winder handle kit, a while ago I bought a Incea 7518 router plate.

How would you affix it to the T/S?, the T/S fence brackets are not very long.

[Bruce Wrenn]

Your question was answered before you asked it. Read the thread about how an extension table is attached to a Unisaw. It has reference to an extension table, built to hold a router.

[Lee Schierer]

I have a cast iron router table-saw extension wing, that I dont use, as it a PITA to use, always in the way of the T/S.
468585

Some reason photo will not attached

Your photo attached, you just can't see it because only contributors have photo viewing privileges. You can be a contributor for a mere $6.00 per year contribution.