Clark Pace
02-12-2020, 8:55 PM
So I thought I would pass along this free and really easy program to use for my laser. It is called contracam.
Simply plug in your usb or ip camera. Enter in its IP address on the computer that it is plugged in to, and then go to any browser type admin-pc8800 and there is your camera. I'm not sure if you can use more than one camera. I am going to try though as I have 2 lasers.
So yes I just added a 2nd usb camera. And it will show both on your browser. I think you can load the software on the client machine also if you don't want to use a browswer
Simply plug in your usb or ip camera. Enter in its IP address on the computer that it is plugged in to, and then go to any browser type admin-pc8800 and there is your camera. I'm not sure if you can use more than one camera. I am going to try though as I have 2 lasers.
So yes I just added a 2nd usb camera. And it will show both on your browser. I think you can load the software on the client machine also if you don't want to use a browswer